Manual Autodrop Pet Blowing Machine
Our Manual Autodrop PET Blowing Machine is a convenient solution to small to medium size bottle production centers, that need efficiency but not high-end complete automation. Manufactured to blow PET preforms into bottles of standard geometry and structure strength, it will include an autodrop system to discharge finished bottles independently-saving time and eliminating manual handling. It is small in size and requires no more energy than a hair dryer, so it is quite convenient to turn to when a firm is just getting started or produces a modest amount of products on a daily basis. It can used to all kinds of bottle sizes in the packaging of water, juice, and other beverages.
- Manual operation with automatic bottle drop system
- Suitable for 200ml to 2-liter PET bottles
- Low power consumption and easy installation
- Robust build with long service life
- Ideal for small-scale water and beverage plants
Product Specification
| Particulars | Technical Specifications |
|---|---|
| Production Volume | up to 1000 ml |
| Production Capacity (Pcs/hour) | 1000-1100 BPH @ 250 ML |
| Working air pressure | 06-08 Kg |
| Blowing air pressure | 18-20 Kg |
| Air consumption (High Pressure) | 55 CFM @500 ml (20 bar) |
| Mould Opening Stroke | 190 mm |
| Tie Bar Distance | 250 mm |
| Mould cavity number | 2 Nos. |
| Mould thickness | 140 mm |
| Neck diameter | 28-30 mm |
| Staff Required | 2 (only for maintenance and labour) |
| Total power | 08-12 Kw (Only Machine Running Load) |
| Machine weight | 1300 kg |
| Heater type | Infrared heater |
| Make | Makmatic Engineers Private Limited |
| Cylinder | JANATICS |
| Pressure Valves | JANATICS |
| Gear box motor | Bharat bijlee |
| Stretch Operation | Pneumatic |
| Mould Locking | Hydraulic |
| Child Water Supply | Alluminium distribution system to avoid rusting |
| MODEL | MAK-2B-MAN |
| Particulars | Technical Specifications |
|---|---|
| Production Volume | up to 1000 ml |
| Production Capacity (Pcs/hour) | 1600-1700 BPH @ 250 ML |
| Working air pressure | 06-08 Kg |
| Blowing air pressure | 18-20 Kg |
| Air consumption (High Pressure) | 55 CFM @500 ml (20 bar) |
| Mould Opening Stroke | 190 mm |
| Tie Bar Distance | 250 mm |
| Mould cavity number | 4 Nos. |
| Mould thickness | 140 mm |
| Neck diameter | 28-30 mm |
| Staff Required | 2 (only for maintenance and labour) |
| Total power | 12-16 Kw (Only Machine Running Load) |
| Machine weight | 1600 kg |
| Heater type | Infrared heater |
| Make | Makmatic Engineers Private Limited |
| Cylinder | JANATICS |
| Pressure Valves | JANATICS |
| Gear box motor | Bharat bijlee |
| Stretch Operation | Pneumatic |
| Mould Locking | Hydraulic |
| Child Water Supply | Alluminium distribution system to avoid rusting |
| MODEL | MAK-4B-MAN |